Underwriters Laboratories Network IR Speed Dome Camera Manual de Instalação descarregar pdf (Página 6)

IR Speed Dome Installation Manual

Chapter 1 Installation

1.1 Check Parts List

Prior to installation, unpack the dome unit and check whether it is in good condition and all parts and accessories are included by

referring to the packing list.

Note: The power supply for the speed dome is AC24V/3A.

1.2 IR Speed Dome and Network IR Speed Dome Installation

Note: The following installation instructions are applicable to IR speed dome, network IR speed dome and network high-definition IR

speed dome models.

1. Install the dome mount. Please refer to the related sections from Chapter2 to Chapter5 for specific installation methods of different

mounts.

2. Taking the wall mounting application for example, mount the fast mounting adapter and top cover of the IR speed dome to the wall

mount. Pass the integrated cable through the wall mount firstly and then through the top cover.

(1) The fast mounting adapter is shown below:

Figure 1.2.1 Fast mounting adapter

(2) Wrap the thread compound to the thread of fast mounting adapter and screw the thread into the wall mount. Then, wedge the

set screw to the wall mount as shown in figure 1.2.2.

Lock screw

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Sem comentários

Underwriters Laboratories Network IR Speed Dome Camera Manual de Instalação Página 6