Underwriters Laboratories Network IR Speed Dome Camera Manual do Utilizador

Network Camera User Manual KNC-p3BR4IR KNC-p3BR4XIR KNC-p3BR28V12IR KNC-p3DR28V12IR KNC-p3DR4IR KNC-p3LR4IR KNC-p3TR4XIR

User Manual of Network Camera 10 Chapter 2 Network Connection Before you start:  If you want to set the network camera via a LAN (Local Area Net

User Manual of Network Camera 100 another camera as 81, 8001, 555, 8201 with IP 192.168.1.24. Refer to the steps as below: Steps: 1. As the setting

User Manual of Network Camera 11 Figure 2-2 Connecting via a Switch or a Router 2.1.2 Detecting and Changing the IP Address You need the IP address

User Manual of Network Camera 12 Figure 2-3 SADP Interface 2.2 Setting the Network Camera over the WAN Purpose: This section explains how to connec

User Manual of Network Camera 13 2. Assign a LAN IP address, the subnet mask and the gateway. Refer to Section 2.1.2 Detecting and Changing the IP A

User Manual of Network Camera 14 1. Connect the network camera to the router. 2. In the camera, assign a LAN IP address, the subnet mask and the

User Manual of Network Camera 15 Figure 2-7 Normal Domain Name Resolution Steps: 1. Apply a domain name from a domain name provider. 2. Configure

User Manual of Network Camera 16 Chapter 3 Access to the Network Camera 3.1 Accessing by Web Browsers Steps: 1. Open the web browser. 2. Input t

User Manual of Network Camera 17 Figure 3-2 Download and Install Plug-in Figure 3-3 Install Plug-in (1) Figure 3-4 Install Plug-in (2) Note: You m

User Manual of Network Camera 18 3.2 Accessing by Client Software 3.2.1 Accessing by CMS The product CD contains the CMS. You can view the live v

User Manual of Network Camera 19 Figure 3-6 CMS Live View Interface Note: For detailed information about the software, please refer to the user manu

User Manual of Network Camera 2 Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the

User Manual of Network Camera 20 Chapter 4 Wi-Fi Settings Purpose: By connecting to the wireless network, you don‟t need to use cable of any

User Manual of Network Camera 21 4. Check the checkbox to select the Network mode as Manage, and the Security mode of the network is automatically s

User Manual of Network Camera 22 Figure 4-5 Ad-hoc Connection Point 6. Choose the SSID and connect. Security Mode Description: Figure 4-6 Securi

User Manual of Network Camera 23  Authentication - Select Open or Shared Key System Authentication, depending on the method used by your access poi

User Manual of Network Camera 24 Figure 4-9 EAP-TLS  Identity - Enter the user ID to present to the network.  Private key password – Enter the p

User Manual of Network Camera 25 WPS (Wi-Fi Protected Setup) refers to the easy configuration of the encrypted connection between the device and the

User Manual of Network Camera 26 4. Push the WPS button to enable the function on the camera. If there is not a WPS button on the camera, you can

User Manual of Network Camera 27 3. Click Connect. Or You can generate the PIN code on the camera side. And the expired time for the PIN code is 120

User Manual of Network Camera 28 Chapter 5 Live View 5.1 Live View Page Purpose: The live view page allows you to view the real-time video, captur

User Manual of Network Camera 29 Toolbar: Operations on the live view page, e.g., live view, capture, record, audio on/off, two-way aud

User Manual of Network Camera 3 Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply

User Manual of Network Camera 30 5.3 Recording and Capturing Pictures Manually In the live view interface, click on the toolbar to cap

User Manual of Network Camera 31  For the cameras which support lens movements only, the direction buttons are invalid. Table 5-2 Description

User Manual of Network Camera 32  Calling a Preset: This feature enables the camera to point to a specified preset scene manually or when an event

User Manual of Network Camera 33 Chapter 6 Network Camera Configuration 6.1 Configuring Local Parameters Note: The local configuration refers to t

User Manual of Network Camera 34 streaming under some network environments. MULTICAST: It‟s recommended to select MCAST type when using the Multicast

User Manual of Network Camera 35 6.2 Configuring Time Settings Purpose: You can follow the instructions in this section to configure the time sync

User Manual of Network Camera 36 Figure 6-3 Time Sync by NTP Server Note: If the camera is connected to a public network, you should use a NTP serve

User Manual of Network Camera 37 6.3 Configuring Network Settings 6.3.1 Configuring TCP/IP Settings Purpose: TCP/IP settings must be properly confi

User Manual of Network Camera 38 Notes:  The valid value range of MTU is 500 ~ 1500.  The Multicast sends a stream to the multicast group add

User Manual of Network Camera 39 which is not occupied. Server Port: The default server port number is 8000, and it can be changed to any port No. ra

User Manual of Network Camera 4 Safety Instruction These instructions are intended to ensure that the user can use the product correctly to avoid dan

User Manual of Network Camera 40 the camera. Steps: 1. Enter the DDNS Settings interface: Configuration > Advanced Configuration > Network >

User Manual of Network Camera 41 Figure 6-10 DynDNS Settings  IP Server: Steps: (1) Enter the Server Address of the IP Server. (2) Click Save to s

User Manual of Network Camera 42 Figure 6-12 NO-IP DNS Settings (2) Enter the Server Address as www.noip.com (3) Enter the Domain name you registere

User Manual of Network Camera 43 6.3.5 Configuring SNMP Settings Purpose: You can set the SNMP function to get camera status, parameters and alarm r

User Manual of Network Camera 44 Figure 6-14 SNMP Settings 2. Check the corresponding version checkbox ( , , ) to enable the feature. 3. Configur

User Manual of Network Camera 45 The IEEE 802.1X standard is supported by the network cameras, and when the feature is enabled, the camera data

User Manual of Network Camera 46 Steps: 1. Enter the QoS Settings interface: Configuration >Advanced Configuration > Network > QoS Figur

User Manual of Network Camera 47 Figure 6-17 Configure UPnP Settings 6.3.9 Email Sending Triggered by Alarm Purpose: The system can be configured t

User Manual of Network Camera 48 Figure 6-18 Email Settings 3. Configure the following settings: Sender: The name of the email sender. Sender’s Add

User Manual of Network Camera 49 this checkbox to use authentication to log in to this server and enter the login user Name and password. Choose Rece

User Manual of Network Camera 5 Cautions:  Make sure the power supply voltage is correct before using the camera.  Do not drop the camera or su

User Manual of Network Camera 50 or a timing snapshot task. Steps: 1. Enter the FTP Settings interface: Configuration >Advanced Configuration >

User Manual of Network Camera 51 3. Click Save to save the settings. Note: If you want to upload the captured pictures to FTP server, yo

User Manual of Network Camera 52 3. You can customize the following parameters for the selected main stream or sub-stream: Video Type:

User Manual of Network Camera 53 Scalable Video Coding is an extension of the H.264/AVC standard. Set it OFF or ON according to your actual needs.

User Manual of Network Camera 54 discriminate the ROI and background information in compression, that is to say, the technology assigns more encoding

User Manual of Network Camera 55 can choose the Image Quality Enhancing level for ROI encoding, and you can also name the ROI area. 5. Click Save to

User Manual of Network Camera 56 Figure 6-25 Display Settings of Day/night Auto-switch  Image Adjustment Brightness describes bright of the im

User Manual of Network Camera 57 1/100,000s. Adjust it according to the actual luminance condition.  Focus Settings For the camera supports electr

User Manual of Network Camera 58 AUTO, and the IR LED changes according to the actual luminance. E.g.: if the current scene is bright en

User Manual of Network Camera 59 Rotate: To make a complete use of the 16:9 aspect ratio, you can enable the rotate function when you use the camera

User Manual of Network Camera 6 Table of Contents Chapter 1 System Requirement ...

User Manual of Network Camera 60 3. Click Day tab to configure the parameters applicable for day mode. 4. Click Night tab to configure the paramete

User Manual of Network Camera 61 Figure 6-30 Adjust OSD Location 6. Click Save to activate above settings. 6.5.3 Configuring Text Overlay Settings

User Manual of Network Camera 62 4. (Optional)Use the mouse to click and drag the red text frame in the live view window to adjust the text overl

User Manual of Network Camera 63 6.6 Configuring and Handling Alarms This section explains how to configure the network camera to respond to alarm e

User Manual of Network Camera 64 Configuration-Live View Parameters-rules. Figure 6-33 Enable Motion Detection (4)Click Draw Area. Click and drag th

User Manual of Network Camera 65 (2)Choose the day you want to set the arming schedule. (3)Click to set the time period for the arming schedule. (

User Manual of Network Camera 66  Audible Warning Trigger the audible warning locally. And it only supported by the device have the audio output. 

User Manual of Network Camera 67 Figure 6-37 Expert Mode of Motion Detection  Day/Night Switch OFF Steps: (1) Draw the detection area as in the n

User Manual of Network Camera 68 Figure 6-38 Day/Night Auto-Switch (3) Select the area by clicking the area No. (4) Slide the cursor to adjust the s

User Manual of Network Camera 69 Figure 6-39 Day/Night Scheduled-Switch (3) Select the start time and the end time for the switch timing. (4) Select

User Manual of Network Camera 7 6.3.3 Configuring PPPoE Settings ... 39 6.3.4 Conf

User Manual of Network Camera 70 Figure 6-40 Video Tampering Alarm 2. Check Enable Video Tampering checkbox to enable the video tampering

User Manual of Network Camera 71 (Normally Open) and NC (Normally Closed). Edit the name to set a name for the alarm input (optional). Figure 6-41 A

User Manual of Network Camera 72 Configuration>Advanced Configuration> Events > Alarm Output 2. Select one alarm output channel in the Alar

User Manual of Network Camera 73 Steps: 1. Enter the Exception Settings interface: Configuration > Advanced Configuration> Events > Excepti

User Manual of Network Camera 74 Chapter 7 Storage Settings Before you start: To configure record settings, please make sure that you have the netw

User Manual of Network Camera 75 (4) Click Save to add the network disk. 2. Initialize the added network disk. (1) Enter the HDD Settings interf

User Manual of Network Camera 76 Figure 7-4 Quota Settings Notes:  Up to 8 NAS disks can be connected to the camera.  To initialize and use th

User Manual of Network Camera 77 Figure 7-5 Recording Schedule Interface 2. Check the checkbox of Enable Record Schedule to enable scheduled record

User Manual of Network Camera 78 or 10 min. Note: The record parameter configurations vary depending on the camera model. 4. Click Edit to edit th

User Manual of Network Camera 79  Record Triggered by Motion Detection If you select Motion Detection, the video will be recorded when the motion i

User Manual of Network Camera 8 10.2 Configuring RTSP Authentication ... 88 10.3 Anonym

User Manual of Network Camera 80 Figure 7-8 Edit Record Schedule (3) Check the checkbox of Select All and click Copy to copy settings of this day to

User Manual of Network Camera 81 Check the Enable Event-triggered Snapshot checkbox to check event-triggered snapshot. 3. Select the quality of the

User Manual of Network Camera 82 Figure 7-9 Snapshot Settings

User Manual of Network Camera 83 Chapter 8 Playback Purpose: This section explains how to view the remotely recorded video files stored

User Manual of Network Camera 84 Figure 8-3 Playback Toolbar Table 8-1 Description of the buttons Button Operation Button Operation Play Capture a

User Manual of Network Camera 85 Chapter 9 Log Searching Purpose: The operation, alarm, exception and information of the camera can be stored in lo

Chapter 10 Others 10.1 Managing User Accounts Enter the User Management interface: Configuration >Basic Configuration> Security > User

User Manual of Network Camera 87 Figure 10-2 Add a User  Modify a User Steps: 1. Left-click to select the user from the list and click Modify.

User Manual of Network Camera 88  Delete a User Steps: 1. Click to select the user you want to delete and click Delete. 2. Click OK on the pop-up

User Manual of Network Camera 89 Figure 10-5 Anonymous Visit 2. Set the Anonymous Visit permission Enable or Disable in the drop-down list to enabl

User Manual of Network Camera 9 Chapter 1 System Requirement Operating System: Microsoft Windows XP SP1 and above version / Vista / Win7 / Server

User Manual of Network Camera 90 Figure 10-7 IP Address Filter Interface 2. Check the checkbox of Enable IP Address Filter. 3. Select the type of

User Manual of Network Camera 91 (2) Modify the IP address in the text filed. Figure 10-9 Modify an IP (3) Click the OK to finish modifying.  Dele

User Manual of Network Camera 92 Figure 10-10 Device Information 10.6 Maintenance 10.6.1 Rebooting the Camera Steps: 1. Enter the Maintenance inter

User Manual of Network Camera 93 Figure 10-12 Restore Default Settings Note: After restoring the default settings, the IP address is also restored t

User Manual of Network Camera 94 10.6.4 Upgrading the System Steps: 1. Enter the Maintenance interface: Configuration > Basic Configuration> S

User Manual of Network Camera 95 Figure 10-15 RS-232 Settings Note: If you want to connect the camera by the RS-232 port, the parameters of the RS-2

User Manual of Network Camera 96 Appendix Appendix 1 SADP Software Introduction  Description of SADP SADP (Search Active Devices Protocol) is a kin

User Manual of Network Camera 97 newly searched devices will be added to the list. Note: You can click or on each column heading to o

User Manual of Network Camera 98 2. Input the code in the Serial code field and click Confirm to restore the default password.

User Manual of Network Camera 99 Appendix 2 Port Mapping The following settings are for TP-LINK router (TL-WR641G). The settings vary depen