Underwriters Laboratories Network IR Speed Dome Camera Manual do Utilizador descarregar pdf (Página 37)

User Manual of Network Camera

6.3 Configuring Network Settings

6.3.1 Configuring TCP/IP Settings

Purpose:

TCP/IP settings must be properly configured before you operate the camera over

network. The camera supports both the IPv4 and IPv6. Both versions may be

configured simultaneously without conflicting to each other, and at least one IP

version should be configured.

Steps:

1. Enter TCP/IP Settings interface:

Configuration > Basic Configuration > Network > TCP/IP

Or Configuration > Advanced Configuration > Network > TCP/IP

Figure 6-6 TCP/IP Settings

2. Configure the basic network settings, including the NIC Type, IPv4 or IPv6

Address, IPv4 or IPv6 Subnet Mask, IPv4 or IPv6 Default Gateway, MTU settings

and Multicast Address.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 99 100

Sem comentários

Underwriters Laboratories Network IR Speed Dome Camera Manual do Utilizador Página 37