Underwriters Laboratories Network IR Speed Dome Camera Manual do Utilizador descarregar pdf (Página 72)

User Manual of Network Camera

Configuration>Advanced Configuration> Events > Alarm Output

2. Select one alarm output channel in the Alarm Output drop-down list. You can

also set a name for the alarm output (optional).

3. The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or

Manual. The delay time refers to the time duration that the alarm output remains in

effect after alarm occurs.

4. Click Edit to enter the Edit Schedule Time interface. The time schedule

configuration is the same as the settings of the arming schedule for motion detection

Refer to Task 2 Set the Arming Schedule for Motion Detection in Section 6.6.1.

5. You can copy the settings to other alarm outputs.

6. Click Save to save the settings.

Figure 6-42 Alarm Output Settings

6.6.5 Handling Exception

The exception type can be HDD full, HDD error, network disconnected, IP address

conflicted and illegal login to the cameras.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 99 100

Sem comentários

Underwriters Laboratories Network IR Speed Dome Camera Manual do Utilizador Página 72